2,962 research outputs found

    Non-Newtonian thin films with normal stresses: dynamics and spreading

    Get PDF
    The dynamics of thin films on a horizontal solid substrate is investigated in the case of non-Newtonian fluids exhibiting normal stress differences, the rheology of which is strongly non-linear. Two coupled equations of evolution for the thickness of the film and the shear rate are proposed within the lubrication approximation. This framework is applied to the motion of an advancing contact line. The apparent dynamic contact angle is found to depend logarithmically on a lengthscale determined solely by the rheological properties of the fluid and the velocity of the contact line

    Understanding the effect of seams on the aerodynamics of an association football

    Get PDF
    The aerodynamic properties of an association football were measured using a wind tunnel arrangement. A third scale model of a generic football (with seams) was used in addition to a 'mini-football'. As the wind speed was increased, the drag coefficient decreased from 0.5 to 0.2, suggesting a transition from laminar to turbulent behaviour in the boundary layer. For spinning footballs, the Magnus effect was observed and it was found that reverse Magnus effects were possible at low Reynolds numbers. Measurements on spinning smooth spheres found that laminar behaviour led to a high drag coefficient for a large range of Reynolds numbers, and Magnus effects were inconsistent, but generally showed reverse Magnus behaviour at high Reynolds number and spin parameter. Trajectory simulations of free kicks demonstrated that a football that is struck in the centre will follow a near straight trajectory, dipping slightly before reaching the goal, whereas a football that is struck off centre will bend before reaching the goal, but will have a significantly longer flight time. The curving kick simulation was repeated for a smooth ball, which resulted in a longer flight time, due to increased drag, and the ball curving in the opposite direction, due to reverse Magnus effects. The presence of seams was found to encourage turbulent behaviour, resulting in reduced drag and more predictable Magnus behaviour for a conventional football, compared with a smooth ball. © IMechE 2005

    Between two moments

    Full text link
    In this short note, we draw attention to a relation between two Horn polytopes which is proved in [Chenciner-Jim\'enez P\'erez] as the result on the one side of a deep combinatorial result in [Fomin,Fulton, Li,Poon], on the other side of a simple computation involving complex structures. This suggested an inequality between Littlewood-Richardson coefficients which we prove using the symmetric characterization of these coefficients given in [Carr\'e,Leclerc].Comment: 9 pages, 3 figure

    0520. The role of mitochondrial dysfunction in the pathophysiology of icu-acquired weakness

    Get PDF

    Circadian regulation of abiotic stress tolerance in plants

    Get PDF
    Extremes of temperatures, drought and salinity cause widespread crop losses throughout the world and impose severe limitations on the amount of land that can be used for agricultural purposes. Hence, there is an urgent need to develop crops that perform better under such abiotic stress conditions. Here, we discuss intriguing, recent evidence that circadian clock contributes to plants’ ability to tolerate different types environmental stress, and to acclimate to them. The clock controls expression of a large fraction abiotic stress-responsive genes, as well as biosynthesis and signalling downstream of stress response hormones. Conversely, abiotic stress results in altered expression and differential splicing of the clock genes, leading to altered oscillations of downstream stress-response pathways. We propose a range of mechanisms by which this intimate coupling between the circadian clock and environmental stress-response pathways may contribute to plant growth and survival under abiotic stress

    Application of High Performance Photoinitiating Systems for Holographic Grating Recording

    Get PDF
    In this chapter, a compilation of different systems able to photogenerate active radicals toward polymerization reaction( type I, type II and three component photoinitiating systems) for application in holographic grating recording when associated to monomers is reviewed. In particular, the visible curable system is associated to fluorinated acrylate monomers formulation for creation of transmission gratings. The PIS efficiencies are presented in term of diffraction grating yields and compared to photopolymerization experiments. The special case of photocyclic initiating systems is described in details, its influence on the grating built up being discussed on the basis of selected mixtures using visible dyes, electron donors (e.g. amines), electron acceptors (e.g. iodonium salts) or hydrogen donors as coinitiators. The role of the photochemical properties of dye on the performance of the holographic recording material is investigated through time resolved and steady state spectroscopic studies of the PIS (e.g. nanosecond laser flash photolysis), to highlight the photochemistry underlying active radicals photogeneration. In order to get more insight into the hologram formation, grating formation curves were compared to those of monomer to polymer conversion obtained by real time Fourier transform infrared spectroscopy (RTFTIR). This work outlines the importance of the coupling between the photoinitiating system (i.e. the photochemical reactions) and the holographic resin

    Complete solution of a constrained tropical optimization problem with application to location analysis

    Full text link
    We present a multidimensional optimization problem that is formulated and solved in the tropical mathematics setting. The problem consists of minimizing a nonlinear objective function defined on vectors over an idempotent semifield by means of a conjugate transposition operator, subject to constraints in the form of linear vector inequalities. A complete direct solution to the problem under fairly general assumptions is given in a compact vector form suitable for both further analysis and practical implementation. We apply the result to solve a multidimensional minimax single facility location problem with Chebyshev distance and with inequality constraints imposed on the feasible location area.Comment: 20 pages, 3 figure

    A bioprinted 3D gut model with crypt-villus structures to mimic the intestinal epithelial-stromal microenvironment

    Get PDF
    The intestine is a complex tissue with a characteristic three-dimensional (3D) crypt-villus architecture, which plays a key role in the intestinal function. This function is also regulated by the intestinal stroma that actively supports the intestinal epithelium, maintaining the homeostasis of the tissue. Efforts to account for the 3D complex structure of the intestinal tissue have been focused mainly in mimicking the epithelial barrier, while solutions to include the stromal compartment are scarce and unpractical to be used in routine experiments. Here we demonstrate that by employing an optimized bioink formulation and the suitable printing parameters it is possible to produce fibroblast-laden crypt-villus structures by means of digital light projection stereolithography (DLP-SLA). This process provides excellent cell viability, accurate spatial resolution, and high printing throughput, resulting in a robust biofabrication approach that yields functional gut mucosa tissues compatible with conventional testing techniques.Copyright © 2023 Elsevier B.V. All rights reserved

    Skeletal muscle dysfunction is associated with derangements in mitochondrial bioenergetics (but not UCP3) in a rodent model of sepsis

    Get PDF
    Muscle dysfunction is a common feature of severe sepsis and multi-organ failure. Recent evidence implicates bioenergetic dysfunction and oxidative damage as important underlying pathophysiological mechanisms. Increased abundance of uncoupling protein-3 (UCP-3) in sepsis suggests increased mitochondrial proton leak, which may reduce mitochondrial coupling efficiency but limit ROS production. Using a murine model, we examined metabolic, cardiovascular and skeletal muscle contractile changes following induction of peritoneal sepsis in wild-type and Ucp3(-/-) mice. Mitochondrial membrane potential (Δψm) was measured using two-photon microscopy in living diaphragm, and contractile function was measured in diaphragm muscle strips. The kinetic relationship between membrane potential and oxygen consumption was determined using a modular kinetic approach in isolated mitochondria. Sepsis was associated with significant whole body metabolic suppression, hypothermia and cardiovascular dysfunction. Maximal force generation was reduced and fatigue accelerated in ex vivo diaphragm muscle strips from septic mice. Mitochondrial membrane potential was lower in the isolated diaphragm from septic mice despite normal substrate oxidation kinetics and proton leak in skeletal muscle mitochondria. Even though wild-type mice exhibited an absolute 26 ± 6% higher UCP-3 protein abundance at 24 hours, no differences were seen in whole animal or diaphragm physiology, nor in survival rates, between wild-type and Ucp3(-/-) mice. In conclusion, this murine sepsis model shows a hypometabolic phenotype with evidence of significant cardiovascular and muscle dysfunction. This was associated with lower Δψm and alterations in mitochondrial ATP turnover and phosphorylation pathway. However, UCP-3 does not play an important functional role, despite its upregulation
    • 

    corecore